CHARGERS FOR LITHIUM OR LEAD-ACID BATTERIES

3 each in USA Stock (No minimum order)

China stock/production available (10 each minimum order)

• Normal DC Voltage: 3.2V
• Charging Amperage: 20A ± 0.5A
• Max Series Count: 1 battery (This charger is for single batteries, not series)
• Dimensions (inches rounded to Tenth) L*W*H: 7.7*4.7*2.3 (195*118*58 mm)
• Weight: 2.7 Lbs (1.2 kgs)
• Operating Temperature Range: -4°F to 122°F (-20°C to 50°C)
• Cutoff Voltage: 3.65V± 0.2V
• Input power options: 85V-250V 120V 240V 208V 50Hz - 60Hz
• Charging Algorithm: Modified CC/CV (See details below)
• Color: Red
• Automatic Recharging: Charging is restarted if the battery voltage drops
• CE Certified

** Current Protection for your 3.2V 20A LiFePO4 Lithium Battery Intelligent Charger

1. AC Power Overload – Contains a fuse, should the AC power be over-loaded.

2. Reverse Polarity - If the battery clamps are connected incorrectly, the batteries and charger will not be damaged.

3. Battery Voltage – Microprocessor will automatically detect battery voltage/current to avoid battery overheating/charging.

4. Charger Overheat - Drops output power to protect the charger against overheating.

5. Short Circuit - Stops output power when positive and negative short together.

Inverters

This 12V, 24V, or 48V 3000W 3KW 120V/230VAC 50Hz 60Hz Output Pure Sine Wave DC to AC Power Wind and Solar Inverter performs three separate functions:

1.   It converts DC power (such as the power that comes from a battery pack) to AC power which can be used to power all electronic devices that can be plugged into an outlet (as long as the load is using less than the rated power).

2.   It has built-in 50A transfer switch which allows it to automatically switch from using a battery bank to shore power, useful in case of a power outage.

3.   Also, it has a built-in 120A battery charger that can be used to recharge the inverter or even a battery bank

Additional features of your 12V, 24V, or 48V 3000W 3KW 120V/230VAC 50Hz 60Hz Output Pure Sine Wave DC to AC Power Wind and Solar Inverter:

·      Input voltage: 12V, 24V, or 48V

·      AC input voltage: 95V-127V or 164V-243V AC

·      Split Phase Output: 120V or 220/230/240VAC

·      Power output: 3,000W continuous, 9,000W peak

·      Manual 50Hz/60Hz output frequency switch for worldwide operation

·      Pure sine wave output, typically less than 7%, max 10% under full linear load Total Harmonic Distortion (THD)

·      Nominal Efficiency: >90% (Peak)

·      Line Mode Efficiency: >95%

·      Typical Transfer Time: 10ms (Max)

·       Auto Generator Start

·       Battery Temperature Sensing for increased charging precision

·       Maximum THD: 3% at nominal battery voltage

·       Maximum 88% conversion efficiency

·       Powerful 4-stage power factor corrected battery charger up to 120 Amps, settable from 0%-100%

·       High surge output capability, 300% peak load for 20 seconds

·       Fully isolated AC output from battery input

·       Ultra low quiescent current, power Saver Mode to conserve energy

·       Battery type selector for 8 types of batteries and de-sulphation for completely drained batteries

·       10 ms transfer time from AC to battery for continuous load operation

·       Smart remote control with optional LCD display

·       15 sec DC to AC transfer delay, improved protection for generator driven loads

·       Thermally controlled variable speed fan for more efficient cooling

·      Extensive protections against various harsh situations

·      New functionality (Battery priority mode and Low battery recover) developed for renewable energy systems

Pricing Options

·       $1013 - Split Phase 120V/230VAC Output – FOB Salt Lake City, Utah (For 1 each)

·       $999 - Single Phase 230VAC Output – FOB Salt Lake City, Utah (For 1 each)

·       $1013 - Split Phase 120V/230VAC Output - Door-to-door shipping in the Continental USA included – MOQ 2 (For 1 each)

·       $999 - Single Phase 230VAC Output - Door-to-door shipping in the Continental USA included – MOQ 2 (For 1 each)

·      $651 - Split Phase 120V/230VAC Output - FOB China (For 1 each)

·      $637 - Single Phase 230VAC Output - FOB China (For 1 each)

Call for pricing above 5 each at (801) 566-5678

Solar Charge Controllers

Features of the 12V or 24V 20A MPPT Solar ChargeController for Flooded, SLA, AGM, Gel, and Lead Acid Battery Packs:

·        Double crest or multi crest tracing technique design, used when the solar panel is under shadow or part of the solar panel is damaged. Multi crest will turn up in I-V curve, the controller can still trace the Max Power point.

·        Built-in maximum power point tracking algorithm which could promote energy utilization efficiency of PV system. The charging efficiency is 15%-20% higher than PWM mode.

·        Tracking algorithm to track the best working point of the I-V curve promptly and accurately, the MPPT efficiency could reach 99.9%.

·        Advanced digital power supply technology which makes the energy conversion efficiency reach up to 97%.

·        Four charging stages: MPPT – equalizing charge – boost voltage charge – floating charge.

·        With current-limiting charging mode, when the power of the solar panel is oversized, the controller will lower the charging power automatically, which enables the system to work under the rated charging current.

·        Fault code indication to help users confirm the system fault.

·        Various load control methods to improve the system’s flexibility.

·        Temperature compensation function to adjust the charge and discharge parameters automatically, which could improve the life of the battery.

·        Various system protection functions, including over-charge, over-discharge, over-load, over-heat, and battery reversing connection protection.

Technical Specifications of the 12V or 24V 20A MPPT Solar Charge Controller for Flooded, SLA, AGM, Gel, and Lead Acid Battery Packs:

·        System Voltage: 12V or 24V

·        Max Solar Input Voltage: <150V

·        Rated Charge Current: 20A

·        Transfer Efficiency: <97%

·        MPPT Tracing Efficiency: >99%

·        Stand-by Self-Consumption: < 20mA

·        Max Input Power of PV System: 260 Watt/12V or 520 Watt/24V

·        Working Temperature: -31F~149F (-35C~+65C)

·        IP Rating: IP32

Solar Charge Controllers

Features of the 12V or 24V 20A MPPT Solar Charge Controller for Flooded, SLA, AGM, Gel, and Lead Acid Battery Packs:

·        Double crest or multi crest tracing technique design, used when the solar panel is under shadow or part of the solar panel is damaged. Multi crest will turn up in I-V curve, the controller can still trace the Max Power point.

·        Built-in maximum power point tracking algorithm which could promote energy utilization efficiency of PV system. The charging efficiency is 15%-20% higher than PWM mode.

·        Tracking algorithm to track the best working point of the I-V curve promptly and accurately, the MPPT efficiency could reach 99.9%.

·        Advanced digital power supply technology which makes the energy conversion efficiency reach up to 97%.

·        Four charging stages: MPPT – equalizing charge – boost voltage charge – floating charge.

·        With current-limiting charging mode, when the power of the solar panel is oversized, the controller will lower the charging power automatically, which enables the system to work under the rated charging current.

·        Fault code indication to help users confirm the system fault.

·        Various load control methods to improve the system’s flexibility.

·        Temperature compensation function to adjust the charge and discharge parameters automatically, which could improve the life of the battery.

·        Various system protection functions, including over-charge, over-discharge, over-load, over-heat, and battery reversing connection protection.

Technical Specifications of the 12V or 24V 20A MPPT Solar Charge Controller for Flooded, SLA, AGM, Gel, and Lead Acid Battery Packs:

·        System Voltage: 12V or 24V

·        Max Solar Input Voltage: <150V

·        Rated Charge Current: 20A

·        Transfer Efficiency: <97%

·        MPPT Tracing Efficiency: >99%

·        Stand-by Self-Consumption: < 20mA

·        Max Input Power of PV System: 260 Watt/12V or 520 Watt/24V

·        Working Temperature: -31F~149F (-35C~+65C)

·        IP Rating: IP32

Solar Hot Water Pumps

High Efficiency Magnetic Drive Direct Current Circulator for your 9V, 12V, 15V, 18V, 21V, 24V DC, 5.5 GPM, ½ in NPT 95C/203F Hot Water Pump.

Features

·       8-25 Volt, DC, 5.5 GPM, 1/2" NPT, 3' Head

·       Hot water, centrifugal pump

·       Runs at 8-25 DC-Volts (.13-2.1Amps)

·       Eco Centric brass and a permanent magnet robot impeller

·       5.5 gallons per minute (GPM) into a 3" head (1/2" NPT)

·       6 MONTH WARRANTY

The Ecocirc electrically commuted spherical motor design offers many benefits over other pump styles. The Laing design operates on extremely low power input at a specified nominal voltage from 8 to 24 volts; the spherical permanent magnet eliminates impeller slippage which makes the Laing pump up to 40% more efficient than a standard induction motor. The motor has no shaft and therefore no shaft seal that is a wear point and potential leak path. Pump operation is virtually silent, with a low 35 db noise level. The brushless motor has a lifetime in excess of 50,000 hours when operated at nominal voltage and can be powered directly by solar panels, battery or other DC power sources. The unique screw ring design for this series of pumps allows for changing motors without disturbing the pump housing piping. 12’ of head at 35 Watts down to 2’ of head at 10 Watts.

Features and Benefits of your 9V, 12V, 15V, 18V, 21V, 24V DC, 5.5 GPM, ½ in NPT 95C/203F Hot Water Pump

• Solar systems
• Computer cooling systems
• Circulating systems for homes, RV’s and boats
• Engine block circulating systems
• Juice machines
• Aquariums and ponds
• Oxygen generating systems
• Vending machines
• Water fountains
• Process temperature control
• Remote area fluid handling

Lithium Battery Chargers / electriccarpartscompany.com

Solar Charge Controllers

Features of the 12V or 24V 20A MPPT Solar ChargeController for Flooded, SLA, AGM, Gel, and Lead Acid Battery Packs:

part Number ECPC-12V-24V-20A-SCC

 

·        Double crest or multi crest tracing technique design, used when the solar panel is under shadow or part of the solar panel is damaged. Multi crest will turn up in I-V curve, the controller can still trace the Max Power point.

·        Built-in maximum power point tracking algorithm which could promote energy utilization efficiency of PV system. The charging efficiency is 15%-20% higher than PWM mode.

·        Tracking algorithm to track the best working point of the I-V curve promptly and accurately, the MPPT efficiency could reach 99.9%.

·        Advanced digital power supply technology which makes the energy conversion efficiency reach up to 97%.

·        Four charging stages: MPPT – equalizing charge – boost voltage charge – floating charge.

·        With current-limiting charging mode, when the power of the solar panel is oversized, the controller will lower the charging power automatically, which enables the system to work under the rated charging current.

·        Fault code indication to help users confirm the system fault.

·        Various load control methods to improve the system’s flexibility.

·        Temperature compensation function to adjust the charge and discharge parameters automatically, which could improve the life of the battery.

·        Various system protection functions, including over-charge, over-discharge, over-load, over-heat, and battery reversing connection protection.

Technical Specifications of the 12V or 24V 20A MPPT Solar Charge Controller for Flooded, SLA, AGM, Gel, and Lead Acid Battery Packs:

·        System Voltage: 12V or 24V

·        Max Solar Input Voltage: <150V

·        Rated Charge Current: 20A

·        Transfer Efficiency: <97%

·        MPPT Tracing Efficiency: >99%

·        Stand-by Self-Consumption: < 20mA

·        Max Input Power of PV System: 260 Watt/12V or 520 Watt/24V

·        Working Temperature: -31F~149F (-35C~+65C)

·        IP Rating: IP32