Saturday 10 September 2016

CHARGERS FOR LITHIUM OR LEAD-ACID BATTERIES

3 each in USA Stock (No minimum order)
China stock/production available (10 each minimum order)

  • Normal DC Voltage: 3.2V
  • Charging Amperage: 20A ± 0.5A
  • Max Series Count: 1 battery (This charger is for single batteries, not series)
  • Dimensions (inches rounded to Tenth) L*W*H: 7.7*4.7*2.3 (195*118*58 mm)
  • Weight: 2.7 Lbs (1.2 kgs)
  • Operating Temperature Range: -4°F to 122°F (-20°C to 50°C)
  • Cutoff Voltage: 3.65V± 0.2V
  • Input power options: 85V-250V 120V 240V 208V 50Hz - 60Hz
  • Charging Algorithm: Modified CC/CV (See details below)
  • Color: Red
  • Automatic Recharging: Charging is restarted if the battery voltage drops
  • CE Certified

** Current Protection for your 3.2V 20A LiFePO4 Lithium Battery Intelligent Charger
1. AC Power Overload – Contains a fuse, should the AC power be over-loaded.
2. Reverse Polarity - If the battery clamps are connected incorrectly, the batteries and charger will not be damaged.
3. Battery Voltage – Microprocessor will automatically detect battery voltage/current to avoid battery overheating/charging.
4. Charger Overheat - Drops output power to protect the charger against overheating.
5. Short Circuit - Stops output power when positive and negative short together.

Sunday 4 September 2016

Inverters

This 12V, 24V, or 48V 3000W 3KW 120V/230VAC 50Hz 60Hz Output Pure Sine Wave DC to AC Power Wind and Solar Inverter performs three separate functions:

1.   It converts DC power (such as the power that comes from a battery pack) to AC power which can be used to power all electronic devices that can be plugged into an outlet (as long as the load is using less than the rated power).
2.   It has built-in 50A transfer switch which allows it to automatically switch from using a battery bank to shore power, useful in case of a power outage.
3.   Also, it has a built-in 120A battery charger that can be used to recharge the inverter or even a battery bank
Additional features of your 12V, 24V, or 48V 3000W 3KW 120V/230VAC 50Hz 60Hz Output Pure Sine Wave DC to AC Power Wind and Solar Inverter:
·      Input voltage: 12V, 24V, or 48V
·      AC input voltage: 95V-127V or 164V-243V AC
·      Split Phase Output: 120V or 220/230/240VAC
·      Power output: 3,000W continuous, 9,000W peak
·      Manual 50Hz/60Hz output frequency switch for worldwide operation
·      Pure sine wave output, typically less than 7%, max 10% under full linear load Total Harmonic Distortion (THD)
·      Nominal Efficiency: >90% (Peak)
·      Line Mode Efficiency: >95%
·      Typical Transfer Time: 10ms (Max)
·       Auto Generator Start
·       Battery Temperature Sensing for increased charging precision
·       Maximum THD: 3% at nominal battery voltage
·       Maximum 88% conversion efficiency
·       Powerful 4-stage power factor corrected battery charger up to 120 Amps, settable from 0%-100%
·       High surge output capability, 300% peak load for 20 seconds
·       Fully isolated AC output from battery input
·       Ultra low quiescent current, power Saver Mode to conserve energy
·       Battery type selector for 8 types of batteries and de-sulphation for completely drained batteries
·       10 ms transfer time from AC to battery for continuous load operation
·       Smart remote control with optional LCD display
·       15 sec DC to AC transfer delay, improved protection for generator driven loads
·       Thermally controlled variable speed fan for more efficient cooling
·      Extensive protections against various harsh situations
·      New functionality (Battery priority mode and Low battery recover) developed for renewable energy systems

Pricing Options
·       $1013 - Split Phase 120V/230VAC Output – FOB Salt Lake City, Utah (For 1 each)
·       $999 - Single Phase 230VAC Output – FOB Salt Lake City, Utah (For 1 each)
·       $1013 - Split Phase 120V/230VAC Output - Door-to-door shipping in the Continental USA included – MOQ 2 (For 1 each)
·       $999 - Single Phase 230VAC Output - Door-to-door shipping in the Continental USA included – MOQ 2 (For 1 each)
·      $651 - Split Phase 120V/230VAC Output - FOB China (For 1 each)
·      $637 - Single Phase 230VAC Output - FOB China (For 1 each)

Call for pricing above 5 each at (801) 566-5678